★ The first real truck suspension in 130 yearsMade in USAVeteran owned
Commercial & Hotshot

What Is Tongue Weight? How to Calculate It and Why It Changes Your Truck

What is tongue weight, how do you calculate it, and what happens when it is too light or too heavy? A practical guide for owners towing with HD trucks.

The trailer towed fine on the way out. On the way home, with the generator and the spare parts loaded at the back of the deck, it starts to wag at 60 mph, and every passing semi makes it worse. Nothing broke. The trailer is the same weight, give or take. What changed is how much of that weight is pressing down on your hitch, and that is the whole answer to what is tongue weight and why it matters so much.

This guide covers what tongue weight is, the commonly used percentage range, how to calculate and measure it, and what happens to your truck when it is too light or too heavy.

Tongue weight is the trailer's load on your hitch ball

Tongue weight is the downward force the trailer's coupler puts on the hitch ball when the trailer is loaded and sitting level. It is not a separate weight added to the trailer. It is the share of the trailer's total weight that rides on the truck instead of on the trailer's own axles.

That share depends on where the load sits. Weight placed ahead of the trailer axles pushes the tongue down. Weight placed behind them lifts the tongue up. Two identical trailers carrying the same cargo can have very different tongue weights depending on how they were loaded.

For conventional bumper-pull trailers, tongue weight is the figure that matters. Fifth wheel and gooseneck trailers put their load on a hitch in the truck bed, where it is usually called pin weight or hitch weight, and they carry a larger share on the truck by design.

The 10 to 15 percent guideline

The range you will see most often is that tongue weight should be about 10 to 15 percent of the loaded trailer's weight. Government towing guidance uses the same range: North Carolina's Safe Trailering and Towing guide says tongue weight should be at least 10 percent of gross trailer weight and should not exceed 15 percent.

Two details trip people up:

  • The percentage is of loaded weight, not empty weight. A trailer's empty or "dry" figure tells you very little about the tongue weight you will actually tow with.
  • The range is a guideline, not a rating. Your truck's hitch receiver, your trailer's coupler and your truck's payload each have their own limits. The lowest of them wins, even if your percentage looks perfect.

How to calculate tongue weight from the numbers

To find the target range, multiply your loaded trailer weight by 0.10 and by 0.15. A trailer that weighs 8,000 pounds loaded should put roughly 800 to 1,200 pounds on the hitch.

To check the real percentage, divide your measured tongue weight by your measured trailer weight and multiply by 100. The U.S. EPA's vehicle and trailer hitch compatibility worksheet asks exactly that question, whether tongue weight falls within 10 to 15 percent of gross trailer weight, before it asks anything else about the hitch.

The calculation is only as good as the inputs, which is why measuring beats estimating.

Measuring the real tongue weight

At a certified truck scale

This is the most practical method for heavy-duty owners. Weigh the truck with the trailer hitched, and note the steer axle and drive axle figures. Then unhook the trailer, park it, and weigh the truck alone. The difference between the truck's hitched weight and its weight alone is the tongue weight. If you use a weight distribution hitch, disengage the spring bars for the hitched weighing so the full tongue load shows up on the truck. The trailer axle figure from the first weighing, plus the tongue weight, gives you the loaded trailer weight to divide into.

With a tongue weight scale or hitch gauge

Dedicated tongue weight scales and hitch-mounted gauges read the coupler load directly. They are handy for checking quickly at home or at the jobsite after you change the load, and they make it easy to adjust before you leave rather than after a scale stop.

Whichever method you use, measure again whenever the cargo or the way you load it changes.

When tongue weight is too light

Too little weight on the tongue is the dangerous direction. The North Carolina guide warns that not enough tongue weight can result in poor handling or even violent trailer movement, the fishtailing that begins as a gentle wag and builds with speed, wind gusts or a passing truck.

A light tongue usually means too much cargo sits behind the trailer axles. It is common with trailers loaded from the back, with toy haulers carrying heavy machines in the rear garage, and with any trailer where heavy items got loaded last and therefore furthest back.

When tongue weight is too heavy

Too much tongue weight is less dramatic but wears on the truck and the driver. Because a bumper hitch sits behind the rear axle, a heavy tongue acts as a lever. It pushes the rear axle down by more than the tongue weight itself and lifts load off the front axle.

You feel that as:

  • A rear end that squats and a nose that rises, aiming the headlights high.
  • Lighter steering, especially on rough or wet pavement.
  • Longer stops, because the front tires do most of the braking and now have less load pressing them into the road.
  • A rear axle working near its rating, and hitch weight eating into your payload.

Towing heavy and fighting a squatting rear end? See how AdaptiveMotion™ gives hotshot and work-trailer trucks a level stance under hitch load, whether the weight sits on a ball in the bed or on the bumper.

Adjusting tongue weight by moving the load

The fix for tongue weight is almost always in the trailer, not the truck. Heavier items belong ahead of the trailer axles and low, secured so they cannot shift. If tongue weight is too light, move weight forward. If it is too heavy, move some back toward the axles, without going behind them.

On RVs, tank levels change tongue weight too. A full fresh water tank mounted forward adds a lot to the tongue, and the same tank empty removes it. Weigh in the way you actually travel.

A weight distribution hitch does not reduce tongue weight. It spreads some of the load forward to the front axle of the truck and back to the trailer axles. That helps the truck's stance, but the trailer still needs a correct tongue weight to tow straight.

What the hitch load does to the truck behind it

Every pound on the tongue comes out of the truck's payload and presses on the rear axle through the lever of the receiver. Even a perfectly set 12 percent tongue on a big equipment trailer is a lot of weight hanging behind the rear tires. Factory heavy-duty suspension is sprung for that worst case, so it squats with the trailer on and jitters over every seam with the trailer off.

AdaptiveMotion™ tackles that from inside the shocks. Every shock samples the pavement under it at 1,000 Hz, and the response is set wheel by wheel, holding ride height as the coupler comes down on the ball and tightening damping for the added load. Once the trailer is unhooked, the firmness backs off again whenever the road allows, so the drive home empty is not a punishment.

Be clear about what it leaves alone. Your hitch rating, payload and axle ratings do not change, and setting a correct tongue weight is still the trailer's job, done by loading. The system's role is to keep the truck level and composed while it carries whatever tongue weight you set. It attaches at the truck's own mounting points, the frame stays uncut and unwelded, an authorized upfitter performs the work, and the company's FAQ puts typical install time at 20 to 24 shop hours. You will find warranty and maintenance details in the AdaptiveMotion™ FAQs.

Weigh it, set it, then let the truck do its part

Tongue weight is simply the part of your trailer that rides on your truck. Keep it inside the guideline range, measure it on a scale or with a gauge, and fix problems by moving the load. Then make sure the truck under the hitch stays level when that weight arrives.

Ready for a tow rig that sits level hitched and rides properly unhitched? Start with AdaptiveMotion™ for heavy-duty trucks, then reach Patriot through the contact form to line up an authorized upfitter for the install.

Frequently Asked Questions

Does tongue weight count against my truck's payload?

Yes. Tongue weight rides on the truck, so it comes out of the same payload allowance as passengers and cargo. A heavy trailer with a correct tongue percentage can still use up a large part of a truck's payload.

Is tongue weight the same as the hitch rating?

No. Tongue weight is what your trailer actually puts on the hitch. The hitch rating is the most the receiver or hitch is designed to handle. Your measured tongue weight has to stay below the hitch rating, the trailer coupler rating and your truck's payload.

Does tongue weight change during a trip?

It can. Using water from a forward tank, burning fuel from a trailer-mounted tank, or unloading and reloading cargo all change how weight sits on the trailer. If the load changes mid-trip, check the tongue again before the next highway run.

Can tongue weight be too high on a fifth wheel?

Fifth wheels are measured by pin weight rather than tongue weight, and they are built to transfer a bigger portion of their weight to the truck than a bumper-pull. The same logic applies, though: the pin weight has to fit within the truck's payload, rear axle rating and the hitch rating.

Should I measure tongue weight with the trailer loaded?

Always. A tongue weight measured empty tells you how the trailer was built, not how it tows. Measure with the trailer loaded the way you will actually travel, including water, fuel and gear.

See how it fits your rig
Serialized ownership from day one.
Shop
tongue weighttowing safetytowing setuptrailer weighttruck handling
Patriot Dynamic Systems
Veteran owned and based in Ponderay, Idaho, Patriot Dynamic Systems builds AdaptiveMotion™, the bolt-on active suspension for heavy-duty trucks, backed by a 10-year, 1,000,000-mile warranty.

Join the conversation

Leave a comment

Your email address won't be published. Comments are reviewed before they appear.